· HOME > Application > Automobile Painting Heat Dry Facility
Automobile Painting Heat Dry Facility
Model | ICE 01ST | NEP, Excellent Procurement Product | |
---|---|---|---|
Booth Size (Booth interior size) |
Basic Width 4.5M × Length 7M × Height 2.8M | On site survey | |
Elec. Capacity | 36㎾/HR (MAX) | ||
Power | 380V or 220V 3 Phases 4 lines | ||
Technical Spec. |
HS Module | Explosion-proof, 3 kw | |
WG Module | TAPE TYPE | ||
Controller | 4 PART pre-heat/dry time, temperature setting available |
- This specification is subject to change for performance improvement without advanced notice.
Special Strong Points
Comparison of HSWG facility with an existing facility in an automobile maintenance shop.
Facility
Item
|
Heat blow drying facility | Applied facility (Operating from 2006 to present at Deocksan 1 grade General maintenance) |
Electromagnetic wave heat dry system | |
---|---|---|---|---|
Halogen(near infrared) | Far infrared heat plate | |||
Inner dimension of dry booth | 85m2(4.5M(width)x7M(length)x2.7M(height) | |||
Fuel cost (1Charge (1 charge: one automobile & parts heat dry) |
13,200won 22×0.5×1200 (Diesel burner capacity/total heat generated(ℓ) x 1 charge dry time(h)xDiesel price per hour(won) *Diesel burner capacity -200,000㎉/hr |
1,620won 36×0.5×90 (HS module capacity(kw)x 1 charge dry time(h)x electricity charges(won)) |
1,620won 36×0.5×90 (HS module capacity(kw)x 1 charge dry time(h)x electricity charges(won)) |
1,620won 36×0.5×90 (HS module capacity(kw)x 1 charge dry time(h)x electricity charges(won)) |
Fan, Vent (Electricity charges for 1 charge) |
877won(10KW) 19.5×0.5×90 (Fan 8.25 kw +vent. 11.25 kw)x 1 charge running time x electricity charges) |
0won 19.5×0 (Fan 8.25 kw +vent. 11.25 kw)x 1 charge running time x electricity charges) |
0won 19.5×0 (Fan 8.25 kw +vent. 11.25 kw)x 1 charge running time x electricity charges) |
0won 19.5×0 (Fan 8.25 kw +vent. 11.25 kw)x 1 charge running time x electricity charges) |
Pre-heat between charge | Possible | Possible | Illegal(inoperative when painting) | Possible |
Dry Time | 30minutes | 30minutes | 30minutes | 30minutes |
Quality after drying | Average (Convective heat transfer dries painted film first, which produces pin holes) |
Excellent (Improved quality after drying by resolving difficulties in heat blow, electromagnetic wave, and vacuum dry technology) |
Abnormal - Difficult to heat evenly on a large area of the object - Abnormal heat quality due to big difference of temperature in the object - Carbonizing surface and air bubbles when heating rapidly |
Average (Use with fuel for partial drying owing to short distance of far infrared and lower thermal efficiency) |
Work Process | Pre-heating->entering-> heat dry->cooling->Exit |
Pre-heating->entering-> heat dry->Exit |
Pre-heating->entering-> heat dry->Exit |
Not shown on-screen (※Other product applications are the same.) |
Work Environment (Safety & Health) |
Vulnerable (fire hazard & heated air inhaling workers) |
Excellent (certified explosion-proof and cool air) |
Illegal (fire explosion hazard) |
Vulnerable(certified explosion-proof, however heated air inhaling workers) |
Atmosphere Environment (Greenhouse gases Emissions) |
1 toe/charge | 0.00387toe/charge | 0.00387toe/charge | 0.00387toe/charge |